What A Weekly Door Handle Replacement Project Can Change Your Life
Door Handle Replacement
Door handles appear to be something minor, but if you dislike the style or design of them, or are unable to use them and use, you should consider replacing them. Installing a new door handle is simple if you have patience.
Modern door handles are usually equipped with cover plates that hide the screws for an attractive appearance. If your new handle does not have them already attached, you will have to attach them separately.
Remove the old handle
The door handle is not only a decoration for your home It's also a safety feature that allows you to lock and unlock your door. Over time, the door handle may become loose or feel loose. It could also appear aged and worn. This is a sign that it's probably the time to replace your door handle.
One of the first signs that your door handle requires replacing is if it's becoming difficult to operate. This is an issue because it means that you are unable to no longer lock or unlock your door, which could pose the risk of security for you and your family.
Another reason to replace your door handle is when it's damaged or broken. A damaged or broken door handle is dangerous, particularly for elderly and children members who might struggle to open it. They could be trapped. Luckily, it's quite easy to fix a broken door handle by simply replacing the handle that was broken.
Modern door handles are usually standard sizes and should be able to fit any door. If you're not sure whether your new door handle will fit, try taking out the old one and measuring its housing holes. This will help you purchase the right size door handle.
The most straightforward method to take off the door handle you have been using is to unscrew it from the door. This is usually done with a screw driver. Some door handles have a cover plate which hides the screws that mount them. You will need to remove it to get to the screws. After you have removed the old handle, make a note of the way the spindle is connected. This will assist you in aligning the new handle.
Alternatively, you can remove your door handle by unscrewing it from the latch mechanism. You can make use of a screwdriver to take off the door handle. However, you will have to locate the tiny latch, which is located on the edge trim piece. Once you've removed the latch, you'll need to unscrew the handle from the strike plate, and then remove the latch off the door's edge.
The Strike Plate
You'll need to replace the latch plate when replacing the handle. This is the plate that holds the hole through which the latch for the door is inserted when the door is closed. The packaging that the new handles are packaged with will offer two different latch plates - either a rectangular or circular (see the diagram above detailing the components of a door handle). If your current latch plate has a rectangular shape, switch it out for the round one so that the latch is able to hook into the strike plate in a way that makes the handle easier to use.
The first step is to remove the screw that holds the latch plate. These screws can be quite tight and will require some force to loosen. It might be beneficial to get a second person to assist in this area if it is possible.
After the screws are removed, the latch plate will slide out of the door easily. If it is stuck or doesn't move, use a small nail file to scratch around the edges of the latch plate. This may help free the plate.
Now you can prepare the new strike plate to be installed. Utilizing the wood screws that came with the new handles, screw the latch plate onto the inside of the doorjamb. Don't over tighten your screws because this could damage the strike plate.
If go 're not sure if the latch plate is in the proper position You can try closing and then opening the door to see whether it locks and closes correctly. If not you'll need to adjust the strike plate up or down, or move it forward or back, until the door closes and latches correctly.
If the door is moving or jiggling, you may need to increase the size of the hole for latching in the strike plate. This is more frequent on older doors. It could be caused by wear and tear hinges that are too small, a wrong size latch, or a damaged strike plate. If this is the case, follow the same procedure as adjusting the strike plate, but using the use of a metal file instead a chisel and hammer.
Take off the Latch
The latch is a bent metal piece that slides into and out of a hole in the inside of your door. The latch is pushed forward when you turn the handle. It also hooks into an opening in the frame of the door to keep the door closed. If your door shakes when you close it, an upgrade to the latch could be all you need to correct the issue.
The screws that secure the door latch are difficult to see, but you can usually put a screwdriver in a small hole in the trim plate and then pry the latch off. Once you've removed the trim plate, it will be simple to take off the latch as well as the bolts that keep the latch and spindle in place.
If the latch is not easily removed using a paperclip or tool to take it off the handle mechanism. Place the item in the slot for the latch that is recessed. gently twist or jiggle it until you feel the handle and latch begin to separate. It is possible to repeat this procedure several times before you are able to remove the latch.
You should be able to slide the new latch into its slot with no problems after you have removed the old one. Make sure that the latch is positioned correctly in the slot and is aligned with the screw chambers and then use your new screws to attach it to the strike plate and door frame.
Before you install the new handle, be sure to measure your current backset (the distance from the center of the big hole on the front surface of the door to the edge). Make sure that the size of the latch of the new handle is equal to the measurement.
If you're replacing the handle or latch or handle, or if your previous lock cylinder has been damaged, then you will need an entirely new one. If you're not changing locks, the new latch should fit in your existing recess and will work with your current keys. Make sure you select the latch with a rectangular cover plate that match your handles.
Removal of the Cover Plate
You can replace your door handles with a contemporary design of roses and levers to enhance the appearance of your home. You can buy complete sets that come with the appropriate escutcheons and privacy adjustor kits.
To replace the door handle inside, remove the cover plate (or rose), which protects the screws and the inner mechanism. Look for a release tab on the plate, and make use of a flathead screwdriver to remove it from the knob. It may have a slot on one edge or be secured by a pin.
Remove the screw holding the handle in the interior and set it aside once the cover plate has been removed. You'll also need to remove the screws that hold the latch and inner plates and the latch plate, which can be done by loosening them using the help of a Philips screwdriver. Remove the inner plates and latch from the door. Put them away.
Some doors don't have this gap. If it doesn't, you'll need to drill a hole in the door to accommodate the new handle. This is the same procedure as opening a locked door however you'll need to be extra careful not to scratch the frame or door.
After drilling the holes after which you'll have to put in new door knob screws. Choose the same size as the old screws to prevent getting the handle that is too loose or tight. It's also necessary to install an additional strike rod and latch plate that aren't part of the majority of door handle sets.
Amazon's Choice FAERSI 2-piece chrome finish handle sets are a fantastic choice if you're in the market of a high-quality interior door handle replacement set. It's a factory-fit and has received hundreds of 5-star reviews from happy customers. It's an excellent choice to replace damaged or worn interior door handle hardware on your Chevy HHR.